Courses

This training is focused on development of skills needed to calculate, set up, and use a pipe laser for installation of various types of sewer and watermain pipes.  Also covered in  this course are laser safety and best practices for running control on a pipelaying job

The Polyethylene Pipe Fusion course is designed for workers who want to learn more about the fusing together of polyethylene (PE) pipes. Participants will learn about the fusing machine, the fusing process, and safety precautions, as well as demonstrate proper procedures for fusing PE pipe. Special emphasis is placed on developing safe work habit.

This course has been constructed to help participants refresh their current math skills and to relate these skills to practical math skills needed by construction craft laborers.  Included in this course are problem solving with fractions and decimals, standard formulas needed in the construction industry, measuring with the US Standard System using feet and inches and the decimal system. 

The Confined Space in Construction: Awareness course provides information that will raise participants' levels of understanding of the hazards of working in and around confined spaces, and the conditions that make a confined space a permit-required confined space. This course is not intended to be used to certify individuals to enter and work as part of a permit-required entry team.

The scaffold user course addresses the needs of CCLs who are responsible for performing job tasks while using scaffolding and to meet the training requirements specified in OSHA CFR 1926.21 & 1926.454 of Subpart L. 

This training covers details from OSHA Subpart F (Fire Protection & Prevention) and Subpart J (Welding & Cutting).  Hot work permits and site prep for hot work is highlighted.  Hands-on portions of this course include a fire extinguisher demo and participants demonstrate the use of the PASS system of using a fire extinguisher.

 This course is available to provide members the opportunity to be evaluated on skills, knowledge, and abilities required on various tasks involved in the pipeline industry.  The training center has instructors who are qualified evaluators with various organizations to supply the need of qualified workers in the pipeline industry for pipeline operators & contractors

The Hazardous Waste Worker Refresher course reviews the major topics of the initial hazardous waste worker training. The course is designed to challenge participants by drawing upon previous training and work experiences to provide practical application of previously learned concepts to real life situations. Additionally, the course covers new technologies, regulatory updates, recent advances, and lessons learned.

 The Asbestos Abatement Worker Refresher course reviews critical topics associated with asbestos abatement activities. Current information regarding new regulations, equipment, work practices and procedures, and other related information is detailed. This course meets all OSHA 29 CFR 1926.1101 requirements and is mandatory for all workers involved in Class I and Class II asbestos abatement work. The course meets the EPA’s 8-hour minimum course requirements as stipulated by 40 CFR Part 763. This course is required annually under the EPA’s Model Accreditation Plan (MAP) and state certification requirements.

This training is provided using The American Red Cross training program.  Included in this training are lessons on the knowledge and skills associated with Adult CPR & AED, Choking, Sudden Illness, Life-Threatening Bleeding, Injuries and Environmental Emergencies.  Skill development is highlighted and practices during all sessions.

The Asbestos Abatement Worker course prepares Construction Craft Laborers to work safely and productively on asbestos abatement projects. Participants receive extensive instruction and hands-on training on work-area preparation, decontamination facility construction and use, abatement techniques, and cleanup procedures. Special emphasis is placed on following proper procedures and developing safe work habits. The course meets all OSHA requirements and is mandatory for all workers involved in Class I and Class II asbestos abatement work. The course exceeds the EPA’s 32-hour minimum course requirements, as stipulated under 40 CFR Part 763.

The Basic Concrete Installation course provides the foundational knowledge and skills CCLs need to work safely and productively in this potentially hazardous field. Safety issues associated with the mixing, forming, placement, and curing of concrete materials are covered, as well as the requisite skills needed to prepare a site for the placement of concrete, building forms, estimating concrete quantities, concrete placement, consolidation and finishing, concrete repair, sawing, coring, and drilling. Ample time is given for hands-on practice for all skills.

The Cutting and Burning course introduces participants to the fundamental principles, safety practices, equipment, and techniques necessary to perform cutting and burning operations safely and productively. Cutting methods covered include oxyfuel, plasma arc and exothermic torches. Content includes fire safety provisions including fire watch and hot work permits.

 This training is designed to cover the Entry Level Driver Training (ELDT) requirements set up by the Federal Motor Carriers Association and 49 CFR Part 380.  Included in this course are the ELDT Theory, Range, & Road training required for a participant to acquire their CDL License. 

This class includes course work which introduces participants to the breakdown of the terms upstream, midstream, downstream and how different portions of the petroleum industry fit into these classifications.  This training is concentrated on work which takes place between the gas meter and the gas distribution main.  Included in this course are modules that include utility locating, polyethylene pipe fusion, Trench & Excavation Safety, development of a site plan which includes traffic control and site restoration.  During hands-on each of the knowledge topics are practiced along with installation of a 4” HDPE main line which is tapped and plumbed to a meter set which is installed as part of the course.  

The Pipeline Technology course introduces participants to the entire pipeline construction process. The course introduces such topics as employee obligations, chain of command on a pipeline, general hazards and precautions, trench and excavation safety, potholing and underground utility line location, the duties of the various crews (fence, ditch, clearing, etc.), cleaning and inspecting pipes, and fabrication yards. Several of the topics require participants to perform tasks or demonstrate skills being taught. Special emphasis is placed on following proper techniques, developing safe work habits, and recognizing unsafe work conditions.

The modules provided in this course enable instructors approved under the OSHA Outreach Training Program to provide OSHA 10-hour or 30-hour Outreach training to participants. Each module provides the information in a particular subject that conveys the required information under OSHA. In addition to Outreach training, the modules can also be used as support material in other classes.

The Infectious Disease Operations course provides Construction Craft Laborers with the knowledge to work safely and effectively in an environment where infectious diseases, including COVID-19, may be present. This course helps CCLs recognize the threat of infectious diseases and how to protect themselves and the public while decontamination and disinfection procedures are in progress.

 The Traffic Control Supervisor course is designed to help the supervisor create a safe roadway construction work zone for workers and travelers by applying guidelines and developing structured processes for implementing internal and external traffic control plans. Participants gain critical knowledge in the types of traffic control devices and how they are used, set up and dismantled.  This course also includes flagger control principles and procedures.

 This Traffic Control & Flagging Course provides direction on the best practices of presenting information on the Flagger Safety and Procedures on Highway work Zone projects. Participates are provided with information in order to demonstrate proper procedures for stopping, slowing and releasing traffic, describe communication methods for two-person flagging operations, describe the correct positioning of flaggers in work zones, identify the proper high visibility clothing worn by flaggers and describe when specific hand-signaling devices should be used.

 The Basic Line and Grade course focuses on the skills, knowledge, and aptitude necessary to operate a variety of surveying instruments and record information for maintaining elevation and alignment control points on heavy and civil construction projects.

 The Confined Space in Construction: Entry course is designed to provide participants with the knowledge and skills associated with working in and around confined spaces. Emphasis is placed on hazard recognition, atmospheric monitoring, entry plans policy and procedures, PPE, and hazard mitigation.

 The Foreman Training course serves as a foundation for workers who are training to become a foreman or general foreman. The course will help participants build on the skills they already possess as experienced workers and expand on those skills and abilities to prepare them to take on greater responsibilities on a jobsite.

 The 40-hour Hazardous Waste Worker course prepares participants to work safely and productively on hazardous waste remediation projects. Key topics explored during the course include chemical hazards, health and safety on the jobsite, respirators, emergency response plans, the HAZWOPER Standard, employee responsibilities and workers’ rights, and more. Special emphasis is placed on following proper procedures and developing safe work habits.

 The Pipelaying course provides the basic knowledge and skills CCLs need to work safely in trenches, and to correctly install, tap, and repair PVC, ductile iron, Polyethylene, and concrete pipe. The course includes instruction on the math skills needed on pipelaying projects and offers hands-on training in proper pipelaying techniques.

 The Hazardous Waste Worker Refresher course reviews the major topics of the initial hazardous waste worker training. The course is designed to challenge participants by drawing upon previous training and work experiences to provide practical application of previously learned concepts to real life situations. Additionally, the course covers new technologies, regulatory updates, recent advances, and lessons learned.

 The Asbestos Abatement Worker Refresher course reviews critical topics associated with asbestos abatement activities. Current information regarding new regulations, equipment, work practices and procedures, and other related information is detailed. This course meets all OSHA 29 CFR 1926.1101 requirements and is mandatory for all workers involved in Class I and Class II asbestos abatement work. The course meets the EPA’s 8-hour minimum course requirements as stipulated by 40 CFR Part 763. This course is required annually under the EPA’s Model Accreditation Plan (MAP) and state certification requirements.

 This course is available to provide members the opportunity to be evaluated on skills, knowledge, and abilities required on various tasks involved in the pipeline industry.  The training center has instructors who are qualified evaluators with various organizations to supply the need of qualified workers in the pipeline industry for pipeline operators & contractors

 The Reducing Silica Exposure course provides Construction Craft Laborers with information regarding the hazards associated with work activities that contain silica, such as concrete sawing or stone cutting of materials.

 This course is designed to develop the user's blueprint reading skills. The course consists of seven learning modules. Totally interactive, each of the modules includes animation, sample drawings, and includes topic specific questionnaires to focus the participants on specific portions of the blueprints that consistently built skills as participants work through the course.  

 The modules provided in this course enable instructors approved under the OSHA Outreach Training Program to provide OSHA 10-hour or 30-hour Outreach training to participants. Each module provides the information in a particular subject that conveys the required information under OSHA. In addition to Outreach training, the modules can also be used as support material in other classes.

 This training is designed to troubleshoot, repair, maintain, and rebuild major components of small engine powered equipment found by CCLs on any construction site.  This includes the basic functioning of 2-stroke & 4-stroke, single and twin cylinder motors.

 This training is designed to cover the Entry Level Driver Training (ELDT) requirements set up by the Federal Motor Carriers Association and 49 CFR Part 380.  Included in this course are the ELDT Theory, Range, & Road training required for a participant to acquire their CDL License. 

 The modules provided in this course enable instructors approved under the OSHA Outreach Training Program to provide OSHA 10-hour or 30-hour Outreach training to participants. Each module provides the information in a particular subject that conveys the required information under OSHA. In addition to Outreach training, the modules can also be used as support material in other classes.

 This training is provided using The American Red Cross training program.  Included in this training are lessons on the knowledge and skills associated with Adult CPR & AED, Choking, Sudden Illness, Life-Threatening Bleeding, Injuries and Environmental Emergencies.  Skill development is highlighted and practices during all sessions.

 The Rise program focuses on the importance of organizing and emphasis the critical importance of membership engagement. The foundation level educates our membership on the principles of unionism and about the history of our union. The builder level focuses on the importance of membership engagement and how to prove unions benefit society.

 This course is available to provide members the opportunity to be evaluated on skills, knowledge, and abilities required on various tasks involved in the pipeline industry.  The training center has instructors who are qualified evaluators with various organizations to supply the need of qualified workers in the pipeline industry for pipeline operators & contractors

 This training is designed to be an awareness level course that introduces participants to the hazards associated with working in or around trenches and excavations.  This training teaches the terms used to describe work the different aspects of T&E work.  This course also covers the types of T&E protection commonly used in the industry and the requirements of OSHA CFR 1926, Subpart P, Excavations.

 This course is designed to provide members an overview of the history of our union throughout its history, from its organization through today and highlights the struggles and victories our members have faces through the years.

The Hazard Communication course introduces participants to OSHA’s Revised Hazard Communication Standard (29 CFR 1926.59), as it applies to the construction industry. Participants learn the guidelines for identifying chemical hazards and the proper use of container labels, placards, pictograms, and safety data sheets (SDS).

Utility locating training teaches the skills, awareness, and knowledge used in the utility location process.  Hazards are covered along with the national color code system and the 811 “One-Call” process.  Proper techniques and procedures are discussed for uncovering utilities safely along with operator qualification evaluation on the task if the individual meets the requirements for evaluation.

 This training is focused on development of skills needed to calculate, set up, and use a pipe laser for installation of various types of sewer and watermain pipes.  Also covered in  this course are laser safety and best practices for running control on a pipelaying job.

 Hand applied pipe coating training is available to teach the specifications, skills, and hazards associated with the application of pipe coatings.  Industry recognition from various manufacturers is available.  This course incorporates every aspect of pipe coating from surface prep to environmental conditions and prepares trained members to be productive members of the coating crew on pipeline projects.

 This training covers details from OSHA Subpart F (Fire Protection & Prevention) and Subpart J (Welding & Cutting).  Hot work permits and site prep for hot work is highlighted.  Hands-on portions of this course include a fire extinguisher demo and participants demonstrate the use of the PASS system of using a fire extinguisher.